Packing; 100g/tube, blister package ,20blister /inner box, 120blister/outer carton :also could make 12 blister per inner carton ,144 blisters per outer carton
Shanghai, Guangzhou, Shenzhen, Ningbo, Qingdao
1 - 3000
To be negotiated
Forsen RTV silicone gasket maker
is a one part RTV silicone that remains flexible and withstands high vibration. Designed
primarily for flange sealing with excellent oil resistance on rigid flange sealing, for example on transmissions and cast metal housings.
Forms a high-quality gasket that seals the space between matched parts to prevent leakage of automotive fluids and gases.
It meets manufacturers’ specifications for original equipment.
Seals joined parts in automotive systems - prevents leakage of antifreeze, air, oil and transmission fluid
Meets manufacturers' warranty requirements
Resists oil better than other silicone gasket makers
Won't interfere with sensors
Tack-free cure (time required to dry past tacky state): 30 minutes
Full cure (time required to reach full set): 24 hours
Temperature range (endurance limits of the gasket maker): -75 F to 625 F
Ideal gap-filling capacity (gap sizes in which gasket maker performs best): 0.001" to 0.125"
Maximum gap-filling capacity (maximum gap size between joined parts): 0.240"
Applications:Valve covers, oil pans, timing covers, water pumps and thermostat housings
Applied as a gel to just one surface of the parts to be joined, silicone gasket maker forms a seal between them, keeping out contaminants. Silicone gasket maker resists oil and shop fluids, vibration, heat, and flexing of parts, replacing many conventional gaskets. Parts joined by this silicone gasket maker can easily be removed. The old gasket material comes off effortlessly, simplifying future disassembly and reassembly.
Directions for use:
1. For best performance bond surfaces should be clean and free from grease.
2. Moisture curing begins immediately after the product is exposed to the atmosphere, therefore parts to be assembled should be mated within a few minutes after theproduct is dispensed.
3. The bond should be allowed to cure (e.g. seven days), before subjecting to heavy service loads.
4. Excess material can be easily wiped away with non-polar solvents.
As Supplied – tested at 23°C±2°C, RH50%±5%:
Aspect: Blue Paste
Specific Gravity: 1.15~1.25
Skinning Time, min: 5~15
Application Temperature, °C: +5 to +40
Drop Degree, MM: ≤1
Extrusion Ability, mL/Min: ≥ 300
As Supplied – tested at 23°C±2°C, RH50%±5% 7 days :
Hardness Shore A: 20~60 ASTM C 661
Tensile Strength, MPa: ≥3.0 ASTM C 1135
Elongation at Breaks, %: ≥200 ASTM D638
Volatility Content, %: ≤35 EPA -24
Depth of Curing, 24H, MM ≥3 ASTM C1184-05
Depth of Curing, 7D, MM ≥6 ASTM C1184-05
Fengshen New Materials Co.,Ltd is a leading manufacturer of wide range of industrial and hardware adhesives for variety of assembly and repair of automobiles application. Fengshen has a good market share in China and have more than 42 customers in 23 countries in North America, South America and middle Asia. Our major customers are Chinese automobile and engineering vehicle makers such as Dongfeng Motor. With the wide use of Chinese automobiles and engineering vehicles, we would like to extend our supply service to the end user worldwide.
Fengshen was established in 2007, now it is a middle-sized enterprise owning nearly 100 employees, 12 sets of large-scale automatic production lines. There are nearly 200 kinds of products which contain RTV neutral silicone sealant, anaerobic sealant, acrylic resin sealant, industrial repairing sealant, car care products and so on. Our products passed SGS and PONY test.